This product is a composition
of biocompatible Polypopylene homopolymer moulded with
a particular low temperature injection moulding technique.
This technique enables higher number of amorphous phases
of the Polypropylene surface.
OFC150
™
Theoretical Diameters
a) Oval Shape
b) Inner Ø :1.5 mm x 1.7 mm
c) Outer Ø :1.75 mm x 2.0 mm
The 0FC150 is an ideal companion of the Optiflex
injector single use IOL Injector which uses the
hydraulic effect. The thinner cartridge enables
micro incision from 1.75 mm to 2.6 mm , depending
upon the insertion technique used. This advancement
in technology aims at greater safety to a patient's
eye and utmost control of injection to the surgeon.
OFC145 ™
Theoretical Diameters
a) Round Shape
b) Inner Ø :1.45 mm
c) Outer Ø :1.70 mm
The 0FC145 along with the use of micro lenses is
an ideal companion of the 0FIHL single use IOL Injector
which works under the hydraulic effect. Injection
in the eye, depending on the insertion technique
used, is possible with utmost precision through
the sub- micro incision from 1.7 mm.
OFC180 ™
Theoretical Diameters
a) Oval Shape
b) Inner Ø :1.8 mm x 2.0 mm
c) Outer Ø :2.16 mm x 2.4 mm
The 0FC180 is and ideal companion of the Optiflex
mechanical OFIMC which gives a mechanical action
to the lens. Injection in the eye, depending on
the insertion technique used, is possible with utmost
precision through an incision from 2.8 mm to 3.2
mm.
